Our Systems
-
MaterialConsumption kg/sq.m.
-
GLOW.PRO G1010,2-0,25kg/m2
-
GLOW.PRO G103special sealing coating
-
GLOW.PRO G102modified coating
Revolutionary, innovative GLOW system for bridges or pedestrian areas made from concrete or concrete tiles, paving tiles or curbed stone.
It is applied in four to five layers over clean, porous surfaces with the parallel use of GLOW.PRO GRANULES and special, modified two-component PU, UV-resistant resins.
These modified resins let the final coating release the glow at night, during total dark or even in lighted areas but with the usage of our special black-light bulbs or spiral black-lights.
Steps :
1. Preparation of the surface to achieve the proper adhesion with the glow coating.
2. Priming of the surface with the GLOW.PRO MODIFIED PRIMER G101, two-component primer, in one layer with consumption of 0,2-0,25 kg per square meter.
3. Application by special airless spray of the GLOW.PRO COATING G102 which consists of GLOW.PRO SAND and special, modified, reinforced resin, in one or two crossing layers.
4. Sealing of the GLOW.PRO COATING G102 with the GLOW.PRO SEALING COATING G103, two-component coating which helps the system to glow.
Application by airless or by rollers.