En | Ar

Our Systems

Our Systems - POLYGLOW ALL AREA for new and old surfaces
POLYGLOW ALL AREA for new and old surfaces
  • Material
    Consumption kg/sq.m.
  • GLOW.PRO G101
    0,2-0,25kg/m2
  • GLOW.PRO G102
    modified coating
  • GLOW.PRO G103
    0,4kg.sq.m
TECHNICAL DESCRIPTION

Revolutionary, innovative GLOW system to renew all existing vertical surfaces made from plaster or concrete or metallic elements.

It is applied in four to five layers over clean surfaces with the parallel use of GLOW PRO granules and special,modified, two-component PU, UV-resistant resins.

These modified resins let the final coating release the glow at night, during total dark or even in lighted areas but with the usage of our special black-light bulbs or spiral black-lights.

 


Steps :

 

1. Preparation of the surface to achieve the proper adhesion with the glow coating.

2. Priming of the surface with the GLOW.PRO MODIFIED PRIMER G101, two-component primer, in one layer with consumption of 0,2-0,25 kg per square meter.

3. Application by special airless spray of the GLOW.PRO COATING G102 which consists of GLOW.PRO SAND and special, modified resin, in one or two layers.

4. Sealing of the GLOW.PRO COATING G102 with the GLOW.PRO SEALING COATING G103, two-component coating, in two layers with total consumption of 0,4 kg per square meter, which helps the system to glow.

Application by airless or by rollers.

© 2016 www.glowprocompany.com, all rights reserved - Web Design by NetPlanet